$9.95 Flat Rate Shipping and Free Shipping on Orders Over $300

Toll Free: (866) 351-4901 | Local: (336) 767-1379 FaceBook linkedIn google plus YouTube

Airtac TCL: with Linear Ball Bearing

Shop for the TCL series of dual-rod air cylinders from Airtac. These double acting pneumatic actuators have a linear ball bearing and are available in the following bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm and 63mm. Stroke options range from 10mm up to 250mm.

1.JIS standard is implemented;
2.Two leaders of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load;
**Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low friction action process. Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.
3.Drive unit and guide unit are in the same barrel so no additional accessories are needed and the smallest space is required. The air intake is optional and it is convenient to install;
4.The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ?PA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation;
5.Four magnetic switch slots of the cylinder provide more choices;
6.Special design of main body provides multi-mount;

Showing 1–12 of 324 results

  • Airtac TCL: 12mm Bore

    Airtac TCL: 12mm Bore (15)

    Shop for the TCL series of dual-rod air cylinders by Airtac. This double acting pneumatic actuator has a 12mm bore with a linear ball bearing. Stroke options range from 10mm to 150mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount.
  • Airtac TCL: 16mm Bore

    Airtac TCL: 16mm Bore (15)

    Shop for the TCL series of dual-rod air cylinders by Airtac. This double acting pneumatic actuator has a 16mm bore with a linear ball bearing. Stroke options range from 10mm to 200mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount.
  • Airtac TCL: 20mm Bore

    Airtac TCL: 20mm Bore (51)

    Shop for the TCL series of dual-rod air cylinders by Airtac. This double acting pneumatic actuator has a 20mm bore with a linear ball bearing. Stroke options range from 20mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount
  • Airtac TCL: 25mm Bore

    Airtac TCL: 25mm Bore (51)

    Shop for the TCL series of dual-rod air cylinders by Airtac. This double acting pneumatic actuator has a 25mm bore with a linear ball bearing. Stroke options range from 20mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount.
  • Airtac TCL: 32mm Bore

    Airtac TCL: 32mm Bore (48)

    Shop for the TCL series of dual rod air cylinders by Airtac. This double acting pneumatic actuator has a 32mm bore with a linear ball bearing. Stroke options range from 25mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount
  • Airtac TCL: 40mm Bore

    Airtac TCL: 40mm Bore (48)

    Shop for the TCL series of dual rod air cylinders by Airtac. This double acting pneumatic actuator has a 40mm bore with a linear ball bearing. Stroke options range from 25mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount
  • Airtac TCL: 50mm Bore

    Airtac TCL: 50mm Bore (48)

    Shop for the TCL series of dual rod air cylinders by Airtac. This double acting pneumatic actuator has a 50mm bore with a linear ball bearing. Stroke options range from 25mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount
  • Airtac TCL: 63mm Bore

    Airtac TCL: 63mm Bore (48)

    Shop for the TCL series of dual rod air cylinders by Airtac. This double acting pneumatic actuator has a 63mm bore with a linear ball bearing. Stroke options range from 25mm to 250mm. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount
  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x100S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x100S

    $106.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 100mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x10S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x10S

    $76.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 10mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x125S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x125S

    $114.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 125mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x150S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x150S

    $122.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 150mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x20S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x20S

    $78.13

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 20mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x25S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x25S

    $79.00

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 25mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x30S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x30S

    $79.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 30mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x40S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x40S

    $94.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 40mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x50S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x50S

    $96.88

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 50mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x60S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x60S

    $98.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 50mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x60S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x65S

    $98.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 65mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x70S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x70S

    $100.38

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 70mm stroke, with magnet


** Due to severe winter weather, our offices will be closed Monday, December 10. We apologize for the inconvenience. ** Dismiss