$9.95 Flat Rate Shipping and Free Shipping on Orders Over $300

Toll Free: (866) 351-4901 | Local: (336) 767-1379 FaceBook linkedIn google plus YouTube

Airtac TR: Dual Rod Guided Air Cylinder, JIS Standard

Shop for the TR series of dual rod guided air cylinders by Airtac. These JIS standard pneumatic actuators are double acting and are available in the following bore sizes: 6mm, 10mm, 16mm, 20mm, 25mm and 32mm. Stroke options range from 10mm to 200mm.

Guided pneumatic actuators utilize guide rods that are mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. Similar to rodless cylinders, dual rod air cylinders reduce rod bending, piston bending and uneven seal wear.

1.JIS standard is implemented.
2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide.
3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide.
4.Mounting holes on three sides facilitates multi-position mounting.
5.It has good resistance to bending and twisting movements.
6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options.
7.There are two groups of air intake and outlet on two sides of the cylinder for selection.
8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact.
9.Standard configuration of this series has magnet. Configuration without magnet is not available.

Showing 1–12 of 146 results

  • Airtac TR: 6mm Bore

    Airtac TR: 6mm Bore (6)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 6mm bore. Stroke options range from 10mm up 50mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: 10mm Bore

    Airtac TR: 10mm Bore (12)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 10mm bore. Stroke options range from 10mm up 100mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: 16mm Bore

    Airtac TR: 16mm Bore (16)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 16mm bore. Stroke options range from 10mm up 200mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: 20mm Bore

    Airtac TR: 20mm Bore (16)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 20mm bore. Stroke options range from 10mm up 200mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: 25mm Bore

    Airtac TR: 25mm Bore (48)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 25mm bore. Stroke options range from 10mm up 200mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: 32mm Bore

    Airtac TR: 32mm Bore (48)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators have a 32mm bore. Stroke options range from 10mm up 200mm. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X100S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X100S

    $77.38

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 100mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X10S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X10S

    $49.38

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 10mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X20S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X20S

    $51.38

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 20mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X25S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X25S

    $52.63

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 25mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X30S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X30S

    $53.63

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 30mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X40S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X40S

    $56.00

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 40mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X50S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X50S

    $57.75

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 50mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X60S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X60S

    $61.75

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 60mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X70S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X70S

    $65.50

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 70mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X75S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X75S

    $67.63

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 75mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X80S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X80S

    $69.63

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 80mm stroke, with magnet


  • Airtac TR: Dual Rod Guided Air Cylinder – TR10X90S

    Airtac TR: Guided Air Cylinder, Dual Rod – TR10X90S

    $73.63

    Guided pneumatic cylinder, dual rod, double acting, 10mm bore, 90mm stroke, with magnet