$9.95 Flat Rate Shipping and Free Shipping on Orders Over $300

Toll Free: (866) 351-4901 | Local: (336) 767-1379 FaceBook linkedIn google plus YouTube

Dual Rod Guided Air Cylinders

Shop for dual rod guided air cylinders by Airtac. Choose from heavy duty or regular (JIS standard) versions. Bore sizes range from 10mm to 63mm, and stroke options range from 10mm to 250mm. These double acting pneumatic actuators come with a magnet are available with PT, NPT or G thread types.

Guided pneumatic actuators utilize guide rods that are mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. Similar to rodless cylinders, dual rod air cylinders reduce rod bending, piston bending and uneven seal wear.

Showing 1–12 of 889 results

  • Airtac TC: Dual Rod Guided Air Cylinder, Heavy Duty, JIS Standard

    Airtac TC: Dual Rod Guided Air Cylinder, Heavy Duty, JIS Standard (648)

    Shop for the TC series of dual rod guided air cylinders from Airtac. These heavy duty pneumatic actuators are double acting and are available with either a steel ball linear or bronze bearing. Bore sizes range from 12mm to 63mm, while stroke options range from 10mm to 250mm.Guided pneumatic actuators utilize guide rods that are mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. Similar to rodless cylinders, dual rod air cylinders reduce rod bending, piston bending and uneven seal wear. 1.JIS standard is implemented. 2.Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load. *Note: Steel ball bearing: It is suitable for elevation action of cylinder or a situation requiring high precision and high bearing ability, especially for a situation requiring low fraction action process. Bronze sliding bearing: It is suitable for action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity. 3.Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install. 4.The bottom, back side and fixating plate of main body respectively have two exact orientation orifices which can provide orientation installation with high precision for the situation. 5.Options of switch mounting with provision four mounting slots. 6.Special design of main body provides multi-mount.
  • Airtac TR: Dual Rod Guided Air Cylinder, JIS Standard

    Airtac TR: Dual Rod Guided Air Cylinder, JIS Standard (146)

    Shop for the TR series of dual rod guided air cylinders by Airtac. These JIS standard pneumatic actuators are double acting and are available in the following bore sizes: 6mm, 10mm, 16mm, 20mm, 25mm and 32mm. Stroke options range from 10mm to 200mm.Guided pneumatic actuators utilize guide rods that are mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. Similar to rodless cylinders, dual rod air cylinders reduce rod bending, piston bending and uneven seal wear. 1.JIS standard is implemented. 2.The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide. 3.It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide. 4.Mounting holes on three sides facilitates multi-position mounting. 5.It has good resistance to bending and twisting movements. 6.Except for axial, each side of the cylinder have installation orifices to provide several installation and fixation options. 7.There are two groups of air intake and outlet on two sides of the cylinder for selection. 8.Bumper in front of the barrel can adjust the stroke of the cylinder and relieve impact. 9.Standard configuration of this series has magnet. Configuration without magnet is not available.
  • Airtac TN: Dual Rod Guided Air Cylinder

    Airtac TN: Dual Rod Guided Air Cylinder (95)

    Shop for the TN series of dual rod guided air cylinders by Airtac. These double acting pneumatic actuators are available in the following bore sizes: 10mm, 16mm, 20mm, 25mm and 32mm. Stroke options range from 10mm to 200mm.Guided pneumatic actuators utilize guide rods that are mounted parallel to the piston rod to provide stable, non-rotating, high side load performance. Similar to rodless cylinders, dual rod air cylinders reduce rod bending, piston bending and uneven seal wear. 1.Enterprises standard is implemented. 2.Embedded installation and fixation mode saves installation space. 3.It has good resistance to bending and twisting movements. 4.Mounting holes on three sides facilitates multi-position mounting. 5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact. 6.Standard configuration of this series has magnet. Configurtion without magnet is not available.
  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x100S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x100S

    $106.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 100mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x10S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x10S

    $76.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 10mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x125S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x125S

    $114.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 125mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x150S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x150S

    $122.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 150mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x20S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x20S

    $78.13

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 20mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x25S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x25S

    $79.00

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 25mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x30S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x30S

    $79.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 30mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x40S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x40S

    $94.63

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 40mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x50S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x50S

    $96.88

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 50mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x60S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x60S

    $98.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 50mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x60S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x65S

    $98.75

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 65mm stroke, with magnet


  • Airtac TCL: Dual Rod Guided Air Cylinder – TCL12x70S

    Airtac TCL: Guided Air Cylinder, Dual Rod – TCL12x70S

    $100.38

    Guided pneumatic cylinder, dual rod, double acting, linear bearing, 12mm bore, 70mm stroke, with magnet