$9.95 Flat Rate Shipping and Free Shipping on Orders Over $300

Toll Free: (866) 351-4901 | Local: (336) 767-1379 FaceBook linkedIn google plus YouTube

Control Panel Accessories

For easy assembly of icotek cable entry devices and EMC products as well as for your cable management needs please try icotek enclosure accessories.

Prefabricated enclosure base plates and module plates with standard cut-outs for our KEL cable entry systems enable a quick and easy install. We designed these base plates for Rittal TS8 enclosures, but we do offer other sizes on request. Various flanged plates that fit e.g. on AE compact enclosures, KL junction boxes or BG bus enclosures by Rittal let you easily mount our cable entry devices at your enclosure wall.

We also offer other enclosure accessories like supports for mounting rails, bus bars as well as reusable hook-and-loop cable ties and suitable holders.

You can find the right solution for your application with icotek enclosure accessories.

Showing 1–12 of 231 results

  • Icotek BP: Blank Plates

    Icotek BP: Blank Plates (55)

    Icotek plastic and metal blind plates to close and seal unused cut-outs in enclosure or machine walls with IP54/IP64.BPK screwable blank plates seal cut-outs for standard 10-pole / 16-pole / 24-pole industrial connectors with protection class IP64.BPM screwable metal blank plates to close cut-outs for standard 6-pole / 10-pole / 16-pole / 24-pole industrial connectors. Blank plates are supplied with a gasket.BPK-RF pluggable blank plates seal cut-outs for standard 10-pole / 16-pole / 24-pole industrial connectors with protection class IP54. For snapping into metal sheet plates (thickness from 1.5 to 3 mm)Blank plates BPK-SNAP to close cut-outs of pre-assembled KEL-SNAP mounting frames. A snap frame can be closed, e.g. during transport to avoid entry of dust, as long as a KEL frame is not mounted.The BPK-SNAP blank plate is simply snapped on the KEL-SNAP frame. There is no tool needed to remove it.BPK-SNAP 16 and BPK-SNAP 24 for closing cut-outs of the KEL-SNAP mounting frames and unused slide frames of the KDR-ESR base plates.
  • Icotek FP: Flange Plates

    Icotek FP: Flange Plates (17)

    Icotek flange plates for mounting cable entry devices on Rittal compact enclosures, terminal boxes or bus enclosures.FP-AE: We supply complete flanged plates FP with 112 × 36 mm cut-outs for compact enclosures of the Rittal AE series. The cut-outs, as well as the drilling template, conform to the standard cut-outs for 24-pole industrial connectors.All flanged plates are RAL 7035 powder-coated. Please use the gaskets of the standard plates. Enclosures are supplied with gaskets and screws.We recommend fastening the cable entry systems with a torque of 1.5 - 2.0 Nm.FP-KL: The FP flanged plates type KL, designed to fit the Rittal KL series junction boxes, are installed in combination with a cable entry system for either pre-terminated or standard cables. FP flanged plates are pre-cut, pre-drilled and painted for easy and quick installation of icotek cable routing products.We recommend fastening the cable entry systems with a torque of 1.5 - 2.0 Nm.FP-BG: The FP flanged plates type BG, designed to fit the Rittal BG series enclosures, have up to 3 cut-outs that match the dimensions of the standard cut-outs for the 24-pole industrial connectors. These flanged plates are installed in combination with a cable entry system for either pre-terminated cables (KEL 24 or KEL-U 24) or standard cables (KEL-DPZ 24 or KEL-DP 24).We recommend fastening the cable entry systems with a torque of 1.5 - 2.0 Nm.
  • Icotek Locknuts: for Cable Glands

    Icotek Locknuts: for Cable Glands (46)

    Icotek hexagonal locknuts for cable glands and cord grips, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.KGM: Hexagonal locknuts with metric threads for attaching components together. For routeing SD-Sub, DVI or PROFIBUS connectors in combination with the split cable glands KVT / QVT, special locknuts with suitable cut-outs are required:KGM-SUB-D9 fits D-Sub 9 connectors (required wall cut-out: ∅ 36 mm) KGM-PB fits DVI and PROFIBUS connectors (required wall cut-out: ∅ 42 mm) KGM-SUB-D25 fits SUB-D25 connectors (required wall cut-out: ∅ 50 mm)GMT: Split hexagonal locknuts GMT for use in combination with split cable glands KVT / QVT whenever pre-terminated cables are routed inside cable protection conduits through a machine or enclosure wall.Suitable for split corrugated conduits CONFIX WST.
  • Icotek MF: Supports for Mounting Rails

    Icotek MF: Supports for Mounting Rails (40)

    Icotek mounting feet for 10 x 3 mm bus bars and 35 mm DIN rails shape H.There are 4 models of supports for mounting bus bars 10 × 3 mm or 35 mm DIN rails. Various supports are available to provide solutions for different conditions.A mounting clip is used for fastening the bus bar to the supports. The support has M6 female screw threads to affix the mounting clip of the DIN rail with a M6 screw.
  • Icotek MP: Modular Gland Plates

    Icotek MP: Modular Gland Plates (9)

    Icotek modular flange plate system for mounting cable entry devices in enclosure bases.The module plates have cut-outs for fixing the KEL range cable entry systems KEL 24, KEL-U 24, KEL-JUMBO, KEL-DPF, KEL-JUMBO flex and KEL-ULTRA flex.The module plates can be fixed on the following positions:Separation plates Closed bottom of the switch box Electronic enclosures by Rittal / Lohmeier The module blind plate without cut-outs is designed for closing unused cut-outs. This module plate can even be used for self-made cut-outs.Module plates are supplied with a gasket. KEL / BPM are preassembled in all module plate sets.
  • Icotek SSK: Bus Bar

    Icotek SSK: Bus Bar (1)

    Icotek 10 x 3 mm bus ba
  • Icotek Cable Ties: for Strain Relief

    Icotek Cable Ties: for Strain Relief (16)

    Icotek cable ties are proven utilities for economical bundling and fixing of cables, looms, tubes, conduits and many other components, e.g. for achieving strain relief.KB: Black cable ties, Bundling range max. 100 mm.KB 28: Heavy duty cable ties, Bundling range max. 100 mm.KB nc: Transparent cable ties, Bundling range max. 100 mm.KLKB-KLB: Reusable hook-and-loop cable ties for bundling and fixing of cables or complete cable harnesses, conduits and hoses. Hook-and-loop cable ties are available individually (KLKB) in four different sizes or as a continuous roll (KLB) in four different sizes.KBH: These holders can be used in combination with hook-and-loop cable ties KLKB and hook-and-loop tape KLB. Large variety of holders provides unique and numerous mounting possibilities.
  • Icotek KDR: Enclosure Base Plates

    Icotek KDR: Enclosure Base Plates (47)

    Enclosure base plates by icotek.KDRKDR-ESR-TS8: The KDR-ESR is a one-piece plate to be assembled on enclosure bases. Slide frames for the KEL cable entry frames are already preassembled.After fitting all cables into the KEL frames, they are easily and quickly inserted into the slide frames and fixed. During maintenance, the KEL frames are removed without tools from the slide frames. Due to the combination KDR-ESR and KEL cable entry frames, a rating of IP54 is achieved (with correct selection of cable grommets). Slide frames which are no longer required, are closed with BPK-SNAP blind plates.The base plate KDR-ESR is designed for Rittal enclosures TS8. Other sizes can be supplied on requestKDR2-TS8: Split, 2-part base plates KDR 2 with pre-cut holes for KEL, KEL-U and KEL-JUMBO cable entry systems.Integrated screw holes provide quick and easy installation of KEL frames.The base plate KDR 2 is designed for Rittal TS8 enclosures. Other sizes can be supplied on requestKDR-BMP: The enclosure base plates KDR-BMP for Rittal enclosures TS8 can be used instead of the 3-piece standard base plates.The base plates are as well installed with standard Rittal clips. On KDR-BMP base plates, our MP Module Plates MP0 - MP8 can be easily mounted and used for installation of cable entry components..MP: The module plates have cut-outs for fixing the KEL range cable entry systems KEL 24, KEL-U 24, KEL-JUMBO, KEL-DPF, KEL-JUMBO flex and KEL-ULTRA flex.The module plates can be fixed on the following positions:Separation plates Closed bottom of the switch box Electronic enclosures by Rittal / Lohmeier The module blind plate without cut-outs is designed for closing unused cut-outs. This module plate can even be used for self-made cut-outs.Module plates are supplied with a gasket. KEL / BPM are preassembled in all module plate sets.KDR-BES: The new 2-piece enclosure base plates KDR-BES are supplied with preassembled brush grommets for a simple cable pass-through.The base plates are installed with standard Rittal clips. Depending on the maximum cable diameter to be routed, the 2 halves of the brush base plate are aligned further or closer to each other.The base plates KDR-BES are perfect for protection of the enclosure interiors against coarse dirt.
  • Icotek BPK 10-RF A: Plastic Blank Plate, Pluggable – 42015.002

    Icotek BPK 10-RF A: Plastic Blank Plate, Pluggable – 42015.002-1

    $7.60

    Plastic blank plate, for KEL 10 series


  • Icotek BPK 10-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42015.002-10

    Icotek BPK 10-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42015.002

    $60.77

    Plastic blank plate, 10 pack, for KEL 10 series


  • Icotek BPK 10: Plastic Blank Plate, Screwable – 42015

    Icotek BPK 10: Plastic Blank Plate, Screwable – 42015-1

    $7.98

    Plastic blank plate for KEL 10 series


  • Icotek BPK 10: Plastic Blank Plate, Screwable 10 Pack – 42015-10

    Icotek BPK 10: Plastic Blank Plate, Screwable 10 Pack – 42015

    $63.86

    Plastic blank plate for KEL 10 series, 10 pack


  • Icotek BPK 16-RF A: Plastic Blank Plate, Pluggable – 42016.002

    Icotek BPK 16-RF A: Plastic Blank Plate, Pluggable – 42016.002-1

    $7.60

    Plastic blank plate, for KEL 16 series


  • Icotek BPK 16-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42016.002-10

    Icotek BPK 16-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42016.002

    $60.77

    Plastic blank plate, 10 pack, for KEL 16 series


  • Icotek BPK 16: Plastic Blank Plate, Screwable – 42016

    Icotek BPK 16: Plastic Blank Plate, Screwable – 42016-1

    $7.98

    Plastic blank plate for KEL 16 series


  • Icotek BPK 16: Plastic Blank Plate, Screwable 10 Pack – 42016-10

    Icotek BPK 16: Plastic Blank Plate, Screwable 10 Pack – 42016

    $63.86

    Plastic blank plate for KEL 16 series, 10 pack


  • Icotek BPK 24-RF A: Plastic Blank Plate, Pluggable – 42024.002

    Icotek BPK 24-RF A: Plastic Blank Plate, Pluggable – 42024.002-1

    $7.60

    Plastic blank plate, for KEL 24 series


  • Icotek BPK 24-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42024.002-10

    Icotek BPK 24-RF A: Plastic Blank Plate, Pluggable 10 Pack – 42024.002

    $60.77

    Plastic blank plate, 10 pack, for KEL 24 series


  • Icotek BPK 24: Plastic Blank Plate, Screwable – 42024

    Icotek BPK 24: Plastic Blank Plate, Screwable – 42024-1

    $7.98

    Plastic blank plate for KEL 24 series


  • Icotek BPK 24: Plastic Blank Plate, Screwable – 42620

    Icotek BPK 24: Plastic Blank Plate, Screwable – 42620-1

    $2.12

    Plastic blank plate for KEL JUMBO flex series