Shop for the Murrelektronik 56720 I/O system -

Current consumption: max. 50 mA
LED display: US: sensor supply and internal supply voltage (green: OK); UA: actuator supply (green: OK)
Fieldbus: via internal system connection
Sensor-system/actuator supply: via internal system connection (max. 2x4 A)
I/O ports: M12 (female) 5-pole, A-coded
Protection: IP67
Mounting method: 2-hole screw mounting
Temperature range: 0 - 55 degrees Celcius (storage temperature -20 - 75 degrees Celcius)
Dimensions H x W x D: 126x30x34.5 mm
Supply voltage: 24 V DC (EN 61131-2), via system connection (max. 4 A)
Conversion time (analog): approx. 1 ms (per channel)
Actuator supply UA: 24 V DC (EN 61131-2), max. 1.6 A per M12 female, (short-circuit and overload protected)
Resolution (analog): 11 Bit
Accuracy: max. /-0.5% (of range limit)
Communication status: via LED
Diagnostic via LED: per module and channel
Diagnostic via BUS: per module and channel
Monitoring - under voltage: yes
Monitoring - no voltage: yes
Short circuit and overload: yes
Actuator warning: per channel via LED and BUS
Wire break upper/lower limit overload: per channel via LED and BUS
Load: max. 500 Ohm
Input range: 0 - 20 mA, 4 - 20 mA

Murr Elektronik Cube67 series is an IP67 rated, fully distributed I/O system with proven reliability in industrial applications. It can connect up to 32 I/O modules within a 60m range. Cube67 supports multiple protocols including Ethernet/IP, EtherCAT, ProfiBus and ProfiNet. Bus nodes have an integrated Power-T as well as communication switch connections, giving you the ability to daisy chain multiple devices together with other items on the bus network.

Advantages:
IP67 rating
Up to 1024 I/O connections
Ethernet/IP with built in web browser
Pin level diagnostics
Short circuit and overload protection
Robotic rated system cable with power and communication
Integrated Ethernet switch
Integrated Power-T
Max. 16 modules per segment or 32 per node
Max. 30 m cable connections/segment or 60 m/node