Shop for the Murrelektronik 57101 I/O system -

Fieldbus: SUB-D9
Operating voltage: 24 V DC (EN 61131-2)
Sensor-system/actuator supply: via terminal
Current consumption: max. 95 mA
Operating modes: Sync- and freeze mode are supported
Transfer rate: max. 12 Mbit/s
Addressing: DIP switch
I/O capacity: with modular expandability by up to 64 Cube I/O modules and function modules
Protection: IP20
Connection: Spring clamp plug-in terminals: max. 1.5 mm^2 (max. 10 A)
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 60 degrees Celcius (storage temperature -25 - 70 degrees Celcius)
Dimensions H x W x D: 109x48.5x76.5 mm
Output voltage (I/Os /Backplane): 24 V DC/5 V DC
Output current (I/Os /Backplane): 10 A/3 A
Communication status: via LED
Diagnostic via LED: per module and channel
Diagnostic via BUS: per module
Monitoring - under voltage: no
Monitoring - no voltage: yes
Short circuit and overload: yes
Actuator warning: no

Murrelektronik Cube20S modules are only 12.9 millimeter wide. Thanks to their modular design they can be easily and quickly connected - the integrated backplane bus connects the modules to power and data.

Cube20S Advantages:
Space saving spring clamp terminals
Configuration diagram on the modules
Safety modules for safe inputs and outputs (up to PLe) Profinet/Profisafe and Profibus/Profisafe
Status LEDs with clear channel assignment
Response time up to 20 microseconds
Highly modular with 2-, 4-, and 8-channel modules
Up to 64 modules per bus node