Compatible with the following deflecting mirror:
MLD-M002 | 66500100

Series: MLD 500
Device type: Transceiver
Operating range: 0.5 - 8m
Number of beams: 2 beams
Beam spacing: 500 mm
Light source: LED, Infrared
LED light wavelength: 850 nm
Transmitted-signal shape: Pulsed
Response time: 50 ms
Restart delay time: 100 ms
Supply voltage: 24 VDC -20 - 20 %
Number of safety-related switching outputs (OSSDs): 2 output
Number of digital switching outputs: 1 output
Switching voltage high, min: 18.2 V
Switching voltage low, max: 2.5 V
Switching voltage, type: 23 V
Voltage type: DC
Switching element for outputs: Transistor, PNP
Connection thread size: M12
Type of display: LED
Number of LEDs: 2
Degree of protection: IP 67
Certifications: c CSA US, c TUV NRTL US, TUV SUd
Functions: Contactor monitoring (EDM), selectable, Timing controlled 2-sensor muting, Sequence controlled 2-sensor muting, Timing controlled 4-sensor muting, Muting-timeout extension, Alternative connection for second muting signal, Muting enable function, Partial muting, Start/restart interlock (RES)

With this type 4 design, all active components, such as transmitter, receiver and the integrated evaluation unit, are contained in a common housing. This reduces wiring considerably.

Advantages:
Through extensive functions, such as start/restart interlock, contactor monitoring, timing controlled 2-sensor muting, sequence controlled 2-sensor muting and timing controlled 4-sensor muting, these multiple light beam safety devices can be used in different areas.
The configuration is simply performed by means of wiring, i. e. no software, PC or DIP switch are necessary
The use at ambient temperatures as low as -30 degrees Celsius is possible
Start/restart interlock (RES), selectable
Contactor monitoring (EDM), selectable
Configurable operating modes
Integrated muting function, no additional muting module is necessary
2-sensor muting, (timing controlled, sequence controlled)
Timing controlled 4-sensor muting
Options: integrated muting indicator, 7-segment display