Compatible with the following transmitter:
MLD500-T1L | 66502000

Series: MLD 500
Type: 4,IEC/EN 61496
Response time: 50 ms
Selection of operating mode: Connection 1, pin 2: 24 V for operating mode 1, 2, 4, Connection 1, pin 2: 0 V for operating mode 3, 5, 6, Connection 1, pin 7: 24 V for operating mode 3, 5, 6, Connection 1, pin 7: 0 V for operating mode 1, 2, 4
Protective Circuit: Short circuit protected, Overvoltage protection
Supply voltage: 24 V DC -20 - 20%
Number of safety-related switching outputs (OSSDs): 2
Voltage type: DC
Switching voltage high, min: 18.2 V
Switching voltage low, max: 2.5 V
Switching voltage, typ: 23 V
Switching element: Transistor, PNP
Type of connection: Connector
Function: Machine interface
Thread size: M12
Material: Metal
Type of Display: LED
Number of LEDs: 1
Degree of protection: IP 67
Certifications: c CSA US, c TUV NRTL US, TUV Sud
Functions: Contactor monitoring (EDM), selectable, Timing controlled 2-sensor muting, Sequence controlled 2-sensor muting, Muting-timeout extension, Alternative connection for second muting signal, Muting enable function, Partial muting, Start/restart interlock (RES)
Special Design: Relfective element for laser alignment aid

The choice is yours

Many functions, such as start/restart interlock, contactor monitoring, timing controlled 2-sensor muting and sequence controlled 2-sensor muting, ensure great flexibility.

The configuration is simply performed by means of wiring, i. e. no software, PC or DIP switch are necessary
The use at ambient temperatures as low as -30 degrees Celcius is possible
Start/restart interlock (RES), selectable
Contactor monitoring (EDM), selectable
Configurable operating modes
Integrated muting function, no additional muting module is necessary
2-sensor muting, (timing controlled, sequence controlled)
Options: integrated laser alignment aid, 7-segment display