Series: 10
Operating principle: Scanning principle with background suppression
Operating range, white 90%: 0.05 - 3.5 m
Operating range limit, white 90%: 0.05 - 8 m
Light source: Laser, Red
Laser class: 1, IEC/EN 60825-1:2007
Light spot size: 7 mm x 7 mm [7,000 mm]
Switching frequency: 40 Hz
Response time: 50 ms
Protective circuit: Short circuit protected, Transient protection, Polarity reversal protection
Supply voltage: 18 - 30 V, DC
Number of digital switching outputs: 2
Output 1 switching element: Transistor, Push-pull
Output 1 switching principle: IO-Link / light switching (PNP)/dark switching (NPN)
Output 2 switching element: Transistor, Push-pull
Output 2 switching principle: Light switching (PNP)/dark switching (NPN)
Interface type: IO-Link
Type of connection: Cable
Cable length: 2000mm
Number of conductors: 5-wire
Design: Cubic
Type of fastening: Through-hole mounting, Via optional mounting device
Operational controls: Membrane keyboard
Degree of protection: IP 67
Certifications: c UL US

The HT 10 is a light scanner with background suppression, with a max. range of 4000 mm. The switching point is almost fully independent of the material. The HT 10 is extremely tolerant with regard to the angle of incidence on the reflective material and is therefore extremely simple and easy to integrate in the system. Thanks to the high tolerance limit, the sensor is also able to operate precisely at all times under changing ambient conditions or varying reflective materials.

Advantages:
Laser class 1 with aligned laser spot
Optionally, up to 3 switching outputs
Reliable detection of dark, glossy and colored objects
Recess for M4 bolts or nuts on both sides
Space-saving, rotatable M12 connection, cable outlet or pigtail
Large control buttons
Status LED visible from above and from front
Configuration options via I/O-Link and Sensor Studio
Compact housing

View the complete product specifications