Compatible with the following deflecting mirrors:
MLD-XM03 | 66500201
MLD-M003 | 66500200

Series: MLD 300
Device type: Transceiver
Operating range: 0.5 - 6m
Opearting range with MLD-XM03: 0.5 - 8m
Number of beams: 3 beams
Beam spacing: 400 mm
Light source: LED, infrared
LED light wavelength: 850nm
Transmitted-signal shape: Pulsed
Response time: 50ms
Restart delay time: 100ms
Supply voltage: 24 VDC, -20-20%
Number of safety-related switching outputs (OSSDs): 2 outputs
Number of digital switching outputs: 1 output
Switching voltage high, min: 18.2 V
Switching voltage low, max: 2.5 V
Switching voltage, type: 23 V
Voltage type: DC
Switching element for outputs: Transistor, PNP
Connection 1 thread size: M12
Type of display: LED
Number of LEDs: 2, Integrated muting indicator
Degree of protection: IP 67
Certifications: c CSA US, c TUV NRTL US, TUV SUd
Functions: Contactor monitoring (EDM), selectable, Timing controlled 2-sensor muting, Sequence controlled 2-sensor muting, Muting-timeout extension, Alternative connection for second muting signal, Muting enable function, Partial muting, Start/restart interlock (RES)
Special design: Integrated muting indicator, Integrated status indicator

With this type 2 design, all active components, such as transmitter, receiver and the integrated evaluation unit, are contained in a common housing. This reduces wiring considerably.
3-beam transceiver replaces more complex systems
Suitable for low temperature environments as low as -30 degrees Celsius
Integrated muting functions for configuration by means of pin assignments
Simple device exchange by means of Plug and Play with no programming
2- and 3-beam systems available
Range from 0.5 to 8 m
M12 connection technology, with integrated AS-i Safety interface if necessary
High robustness against interference through multiple scanning

Advantages:
Many functions, such as start/restart interlock, contactor monitoring, timing controlled 2-sensor muting, sequence controlled 2-sensor muting, ensure great flexibility.
The configuration is simply performed by means of wiring, i. e. no software, PC or DIP switch are necessary
The use at ambient temperatures as low as -30 degrees Celsius is possible
Start/restart interlock (RES), selectable
Contactor monitoring (EDM), selectable
Configurable operating modes
Integrated muting function, no additional muting module is necessary
2-sensor muting, (timing controlled, sequence controlled)
Options: integrated muting indicator, 7-segment display