News

  • We are pleased to announce that we are now able to accept your AirTAC orders for all products. We appreciate your patience after AirTac corporate closed their US office, and look forward to working together.

  • We are pleased to announce that we are now able to accept your AirTAC orders for all products. We appreciate your patience after AirTac corporate closed their US office, and look forward to working together.

$14.95 Flat Rate Shipping on orders more than $50 | $19.95 Flat Rate Shipping on orders less than $50 | Free Shipping on $400 +

Shop for the Murrelektronik 56001 I/O system -

Sensor supply US: 24 V DC (EN 61131-2), max. 700 mA per module
Type: PNP (EN 61131-2)
Input filter: 1 ms
Galvanic isolation: 500 V DC between I/O and system electronics
Fieldbus: SUB-D9 (female)
Sensor-system/actuator supply: 4 x Spring clamp terminals, max. 2.5 mm^2 (max. 12 A)
I/O ports: 8 x Spring clamp plug-in terminals, max. 2.5 mm^2
Operating voltage: 24 V DC (EN 61131-2)
Sensor-system/actuator supply: via terminal UB
Current consumption: max. 150 mA
Operating modes: Sync- and freeze mode are supported
Transfer rate: to 12 Mbit/s
Addressing: Rotary switch 1 - 99
I/O capacity: with modular expandability by up to 15 Cube-modules
Protection: IP20
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 55 degrees Celcius (storage temperature -20 - 85 degrees Celcius)
Dimensions H x W x D: 117x56x47 mm
Terminal row X2 (4 channels): Input
Terminal row X3 (4 channels): Input
Communication status: via LED and BUS
Diagnostic via LED: per module
Diagnostic via BUS: per module and channel
Monitoring - under voltage: yes
Monitoring - no voltage: no
Short circuit and overload: yes

Murr Elektronik Cube20 series is an IP20 rated in-cabinet I/O system designed for ease of installation with a high I/O density in a single space. It can connect up to 15 I/O modules, which gives you up to 488 I/O connections within 90 cm. Cube20 was designed to minimize assembly time, so one part number for one I/O module is all that is necessary when ordering. The I/O modules are connected to each other with a built in ribbon cable for backplane communication and power. Easy to plan, easy to install, easy to adapt.

Advantages:
IP20 rating
Up to 488 I/O connections in 60 cm
Pluggable terminals with spring clamp wire terminations
Single part numbers - no assembly required
Backlit LED for diagnostics
Integrated Ethernet switch
Up to 15 I/O modules after a bus node
Ethernet/IP built in web browser
Din rail mounting


Additional Info

Brand Murrelektronik
Component Type Bus Node
Inputs 8
Io Technology Type PROFIBUS
Material Plastic
Murr Product Series Murrelektronik Cube20
Output Type PNP

Recently Viewed Items