$9.95 Flat Rate Shipping on orders more than $50 | $14.95 Flat Rate Shipping on orders less than $50 | Free Shipping on $300 +

Shop for the Murrelektronik 56450 I/O system -

Sensor supply US: 24 V DC (EN 61131-2), max. 700 mA per module, short-circuit and overload protected
Type: PNP (EN 61131-2)
Input filter: 1 ms
Galvanic isolation: 500 V DC between I/O and system electronics
Current consumption: max. 100 mA
I/O capacity: with modular expandability by up to 3 Cube modules
Fieldbus: M12 (male) 6-pole
Sensor-system/actuator supply: 4 x Spring clamp terminals, max. 2.5 mm^2 (max. 12 A)
I/O ports: 8 x Spring clamp plug-in terminals, max. 2.5 mm^2
Operating voltage: 24 V DC (EN 61131-2)
Sensor-system/actuator supply: via terminal UB
Protection: IP20
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 55 degrees Celcius (storage temperature -20 - 85 degrees Celcius)
Dimensions H x W x D: 117x56x47 mm
Actuator supply UA: 24 V DC (EN 61131-2), max. 12 A
Switching current per output: max. 0.5 A (short-circuit and overload protected)
Galvanic isolation: 500 V DC between I/O and system electronics
Lamp load: 10 W
Terminal row X2 (4 channels): Input/output
Terminal row X3 (4 channels): Input/output
Communication status: via LED
Diagnostic via LED: per module and channel (only outputs)
Diagnostic via BUS: per module and channel
Monitoring - under voltage: yes
Monitoring - no voltage: no
Short circuit and overload: yes

Murr Elektronik Cube20 series is an IP20 rated in-cabinet I/O system designed for ease of installation with a high I/O density in a single space. It can connect up to 15 I/O modules, which gives you up to 488 I/O connections within 90 cm. Cube20 was designed to minimize assembly time, so one part number for one I/O module is all that is necessary when ordering. The I/O modules are connected to each other with a built in ribbon cable for backplane communication and power. Easy to plan, easy to install, easy to adapt.

IP20 rating
Up to 488 I/O connections in 60 cm
Pluggable terminals with spring clamp wire terminations
Single part numbers - no assembly required
Backlit LED for diagnostics
Integrated Ethernet switch
Up to 15 I/O modules after a bus node
Ethernet/IP built in web browser
Din rail mounting

Additional Info

Brand Murrelektronik
Component Type Bus Node
Material Plastic
Murr Product Series Murrelektronik Cube20
Output Type PNP

Recently Viewed Items