Shop for the Murrelektronik 55680 I/O system -

Connection: 1 and 2 to M12
Type: for 3-wire sensors or mechanical switches, PNP
Sensor supply US: max. 200 mA from AS-Interface (short-circuit and overload protected)
Bus voltage (AS-Interface): 26.5 - 31.6 V DC
Total current (AS-Interface): max. 250 mA
Addressing: 1 - 31 via address port
Profile (IO/ID/ID2 code): S-3.F.E
Pin spacing: 18 mm
Protection: IP67
Temperature range: -20 - 70 degrees Celcius (storage temperature -20 - 70 degrees Celcius)
Connection: OUT 1 (Form A), OUT 2 (M12)
Supply voltage: 24 V DC external (18 - 30.2 V DC) EN 61131-2, connection via black AS-Interface profile cable
Switching current per output: max. 2 A (short-circuit and overload protected)
Total current: max. 2 A (only 1 output active)
Communication status: via LED
Diagnostic via LED: per module
Monitoring - no voltage: yes

The Murrelektronik actuator-sensor interface is a simple, low-cost solution for connecting actuators and sensors in the lower field level. The advantage of the system is its ease of use in planning, assembly and installation. The system is supplemented by TUV-certified modules with safe outputs for use in safety circuits up to category 3.

The compact Murrelektronik MASI65 I/O modules make automation child's play in the handling, assembly and packing areas. Thanks to their small size and weight, the MASI65 modules allow a compact assembly in machines.