Image may not be representative of actual product.
Shop for the Murrelektronik 56440 I/O system -
Supply voltage: alternatively (switchable) from AS-Interface or from 24 V DC (EN 61131-2) by additional supply
Sensor supply US: max.200 mA externally or from AS Interface, (short circuit and overload protected)
Type: for 3-wire sensors or mechanical switches, PNP
Input current: max. 10 mA
Bus voltage (AS-Interface): 26.5 - 31.6 V DC
Total current (AS-Interface): max. 300 mA
Addressing: via built-in address port or master
Address range: 1 - 62 (1 - 31 A or B)
Profile (IO/ID/ID2 code): S-7.A.7
Protection: IP20
Connection: Spring clamp plug-in terminal: 0.2 - 2.5 mm^2
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 60 degrees Celcius (storage temperature -20 - 70 degrees Celcius)
Dimensions H x W x D: 114x37x32 mm
Supply voltage: 24 V DC (18 - 30.2 V DC) EN 61131-2 by additional supply, safely separated from input supply
Switching current per output: max. 0.5 A (short-circuit and overload protected)
Total current: max. 2 A
Switch off time in case of short circuit: approx. 20 ms
Communication status: via LED
Diagnostic via LED: per module
Monitoring - no voltage: yes
Murrelektronik MASI00 and MASI20 modules are designed to correctly support the single strand wiring used in control cabinets and terminal boxes. This gives you the advantage during installation, setup and maintenance. The modules have a slim design which makes them the perfect choice for applications in terminal boxes and cabinets. The coded, pluggable connections reduce time and errors during installation.
Advantages:
High signal density in a very small space
Pluggable cutting clamp or spring clamp connections
Sensor supply from AS Interface or 24 V DC
Supply voltage: alternatively (switchable) from AS-Interface or from 24 V DC (EN 61131-2) by additional supply
Sensor supply US: max.200 mA externally or from AS Interface, (short circuit and overload protected)
Type: for 3-wire sensors or mechanical switches, PNP
Input current: max. 10 mA
Bus voltage (AS-Interface): 26.5 - 31.6 V DC
Total current (AS-Interface): max. 300 mA
Addressing: via built-in address port or master
Address range: 1 - 62 (1 - 31 A or B)
Profile (IO/ID/ID2 code): S-7.A.7
Protection: IP20
Connection: Spring clamp plug-in terminal: 0.2 - 2.5 mm^2
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 60 degrees Celcius (storage temperature -20 - 70 degrees Celcius)
Dimensions H x W x D: 114x37x32 mm
Supply voltage: 24 V DC (18 - 30.2 V DC) EN 61131-2 by additional supply, safely separated from input supply
Switching current per output: max. 0.5 A (short-circuit and overload protected)
Total current: max. 2 A
Switch off time in case of short circuit: approx. 20 ms
Communication status: via LED
Diagnostic via LED: per module
Monitoring - no voltage: yes
Murrelektronik MASI00 and MASI20 modules are designed to correctly support the single strand wiring used in control cabinets and terminal boxes. This gives you the advantage during installation, setup and maintenance. The modules have a slim design which makes them the perfect choice for applications in terminal boxes and cabinets. The coded, pluggable connections reduce time and errors during installation.
Advantages:
High signal density in a very small space
Pluggable cutting clamp or spring clamp connections
Sensor supply from AS Interface or 24 V DC
Additional Info
Brand | Murrelektronik |
---|---|
Component Type | Fieldbus Module |
Inputs | 4 |
Material | Plastic |
Murr Product Series | Murrelektronik MASI |
Output Type | PNP |