Shop for the Murrelektronik 56469 I/O system -

Fieldbus: RJ45
Type: EtherNet-IP (IEEE 802.3)
Transfer rate: 10/100 MBaud
Standards: EN 61131-2, EN 62026-2, EN 61000-6-2, EN 61000-6-4
Test isolation voltage: min. 500 V
Protection: IP20
Mounting method: DIN-rail mountable (EN 60715)
Temperature range: 0 - 55 degrees Celcius (storage temperature -25 - 85 degrees Celcius)
Operating voltage: 24 V DC (20 - 30.6 V DC - PELV)
Operating current: max. 250 mA (AS-Interface)
Bus connection: via pluggable spring clamp terminals on the front 0.5 - 1.5 mm^2
Serial interface/diagnostic: RJ45/Fieldbus
Number of slaves: max. 62
Specification: 3.0
Cycle time: 150 microseconds x (number of slaves 2)

The Murrelektronik actuator-sensor interface is a simple, low-cost solution for connecting actuators and sensors in the lower field level. The advantage of the system is its ease of use in planning, assembly and installation. The system is supplemented by TUV-certified modules with safe outputs for use in safety circuits up to category 3.

MASI Gateways P24 Advantages:
Operates with 24V standard power supply
Integrated decoupling network
ASI 3.0 Standard
1 AS-i master for 62 slaves
Comprehensive system diagnostics on the device and by web interface
Easy and fast set-up